As the successor to the SDI xNode, the Telos Alliance SDI AoIP Node continues our commitment to bring the power and flexibility of Audio over IP to broadcast television by de-embedding and converting up to 8 pairs of audio from two SDI inputs to AES67. Audio can then be shared on the network, processed for loudness compliance, and ultimately re-embedded into two SDI output streams.
Features at a Glance
Provides de-embedding, routing, and re-embedding of up to 8 audio pairs through two SDI inputs and outputs
3Gb/s HD/SD-SDI supports UHD applications
AES67 supports SMPTE ST 2110-30 workflows
Compensating video delay maintains proper A/V sync
Provides SRCs for all SDI output channels
Full-width 1RU hardware with dual internal redundant auto-ranging power supplies
Bringing the Power of IP to Television
Radio discovered the myriad benefits of AoIP nearly two decades ago, and hasn’t looked back since. Television broadcasters are now realizing the benefits of networked audio and interoperability between manufacturers and products.
Flexible Routing for Two SDI Signals
The SDI AoIP Node offers two independent 3Gb/s HD/SD-SDI inputs and outputs. Up to 8 audio pairs from either or both SDI inputs can be de-embedded and converted to AES67 and become available anywhere on the network for monitoring, distribution, or loudness control via a Linear Acoustic® AERO.8000 Processing Engine. Up to 8 audio pairs can then be re-embedded (and pair shuffled if desired) to two independent SDI outputs.
Ready Today, Ready for the Future
The SDI AoIP Node supports 3G video standards to seamlessly integrate into UHD facilities. Installations built using SMPTE ST 2110 workflows will appreciate its AES67 I/O which provides native support for SMPTE ST 2110-30.
User-friendly Setup and Configuration
Despite its powerful features and signal routing capabilities, SDI AoIP Node is easy to configure. Its user-friendly web-based UI is device, OS, and browser agnostic, and can be used on any desktop or laptop computer, tablet, or smartphone.
Two independent auto-sensing 3Gb/s HD/SD-SDI inputs (SMPTE 292M, 259M, and 424M) with de-embedding for up to 8 audio pairs
De-embedded audio is converted to AES67 and can be routed anywhere on the network
Fully AES67 compliant and supports SMPTE ST 2110-30 workflows
Supports 2-ch streams with a 1 ms packet time (ptime)
User selectable reference clock
Reference clock options include PTP (AES67), SDI, Internal 48 KHz
Dual internal redundant auto-ranging power supplies
95-240 VAC, 50/60 Hz, 30W maximum
Dimensions and Weight
19” W x 9” D x 1.75” H (approximately 48.2 x 22.8 x4.5 cm )
North America – FCC and CE tested and compliant with UL-approved power supplies
Europe – Complies with European Union Directive 2002/95/EC on the restriction of use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended by Commission Decisions 2005/618/EC, 2005/717/EC, 2005/747/EC (RoHS directive), and WEEE